[djjasond]

5) Remove the plastic rivet securing the rear deck cover in place using a trim panel or pry bar tool. (picture 12) Pull the rear deck cover straight back and move out of the way. The seatbelt is fed through this panel. It is possible to easily move the panel out of the way and access the rear speakers. The rear speakers are top mounted and secured with four Phillips head screws each that can be removed with a screwdriver or 7mm socket. I recommend using a socket on the rear screws as the clearance is very tight. (Note: When removing the rear speakers out of their respective holes, the speaker magnet tends to stick to the rear deck. It then takes a good tug to release it sending it furiously towards your window tint. Keep a hand between the speaker and tint at all times!) (picture 13,14)