[djjasond]

8) Hot Tip: Before reinstalling the door panels, you’ll want to remove the white plastic rivets (locator pins) from the door and reinsert them into their respective holders inside the door trim panel. Note: See pictures of these in step 5. It is basically impossible to re-hang the trim panel over them while in the door. They do not come out easily and look delicate as hell. I was able to pry them out using a large set of wire strippers. I slid the wire strippers around the pin as far back as I could, gently closed the strippers on the pin (risky!), then gently rocked them out, rotating the wire strippers about 90 degrees with each tug. If I had to do it again, I would just get 10 (3 for each front and 2 for the rears) from the Chrysler parts department and not worry about breaking them on the removal.