Quote:
|
Originally Posted by tbyrne
You need to make the relay think that the headlights are on, when either the DRLs or Perimeter lights are activated.Since when the DRLs or Perimeter lights are activated a pulse of alternating0 volts and 13 volts is sent to the relay, this caused the relay to switch
on and off very fast, causing the HIDs to strobe and the relays to chatter.
A capacitor needs to be installed on the two wires on your harness coming
from the connection to the factory headlight connector. These should be as close to the relay as possible. So now, when the DRLs or Perimeter lights are activated
the 0Volt / 13Volt Pulse is modulated out in the capacitor, 13 Volts is sent
to the relay, and the HIDs come on like they are supposed to. It looks like
manufacturers are going to this Pulse Width Modulated type of voltage
control to handle everything from the blower motor controls to DRLs..
|
Will the kits you will be offering have the added capacitor and wiring?
If so I think you will get quite a bit of business from many of us, including myself
