Quote:
|
Originally Posted by shaggy
What is the tsb for the the unconnect. Mine was factory installed and just stopped working check all connections may have a dead module. Please post if you have access to this info
|
The TSB does not give much diagnostics info. Check your module for the P/N range listed below. If you need the diagnostics procedures shoot me a PM, it's about 30pgs worth.
SUBJECT: UConnect Hands Free Phone Inoperative
NOTE: This bulletin applies to vehicles equipped with UConnect™ Hands Free Communications (sales code RSP) as listed below:
Module P/N 05064013AR or higher
DISCUSSION: If the UConnect Hands Free Phone is inoperative and if there are no DTC's, perform the existing diagnostic procedure available in TechCONNECT under: Diagnostics, Telecommunication, Voice Recognition/Phone Switch Circuit Short to Voltage. The problem may be an open phone button circuit. The diagnosis for the open phone button circuit is covered in the “Short To Voltage” test. There is no DTC for the open phone button condition.