View Single Post
Old 03-02-2006, 07:48 PM   #14 (permalink)
Johnny Vig
Senior Member
 
Johnny Vig's Avatar
 
Car: 2006 300C SRT8
Join Date: Aug 2004
Member Number: 616
Location: New Jerzey
Trader Rating: (0)
Posts: 1,015
Quote:
Originally Posted by Ted@MPSC
Well, to answer your question CJR300C, we don't know. We are being told that this kit will work with ALL FACTORY systems. So we are under the assumption that it will work properly with the factory BA Sub. As for the other question, the housing would be different, as those are vehicle specific. I can't imagine it being much diferent though, still the LX platform. I'm sure the wiring is pretty close, but again we do not know for sure.
I will clarify as much as I can for everyone. Hope this helps.

Q. Do you know how this will affect the factory BA Sub? Would the Charger Sub Kicker Sub fit in the 300C. I was wondering because that one is a 200 watt powered sub. Thanks for the info. Answer- No. The kit is specific to the vehicle you have. That is how it is designed, especially the housings.

Q.These kits have there own amp, and you will have to run the supplied wiring. It is marketed by Mopar, so you know they are making it so it will work with your factory systems. They may be tapping into the rear speaker wires for the input, not sure though. The power may tap into the rear mounted battery area that is ignition sourced hot, so you may not have to run wires all the way to the dash. Again, we have no clarification on this yet, and are trying to find out the details. Answer- It will plug into the existing harness located under the rear deck. Power will go to the battery in the rear of the vehicle.

Q. So we are under the assumption that it will work properly with the factory BA Sub. Answer- The factory BA sub will need to be removed when you add this system. The sub amp that is supplied will mount directly where the BA sub is located.

These add-on systems were designed to make it as easy as possible for the customer. You will need to remove the rear seat, side bolsters, and rear parce shelf in order to install everything, but this can all be done in less than 2 hours. It is not intimidating but it does require some patience. The instructions provided should be vey detailed and should also inlcude step by step photos. Good luck everyone, you will enjoy the systemif you choose to go with it.
__________________
2006 SRT8- 12.88@109MPH-Fully Loaded w/Kicker-Born 5/13/05

2006 CHRYSLER 300C SRT8 PICS- 12.88 @109
2003 MUSTANG SVT COBRA PICS- 11.80 @118
1999 CORVETTE (SOLD!!) PICS
Johnny Vig is offline   Reply With Quote