Quote:
|
Originally Posted by vvv90
Actually the rotors are not warped. They are run out. This is due to not properly bedding the brakes immediately after purchase. You can get them resurfaced to remove the brake pad deposits unless the surface has turned to cementite which cannot be removed. If you do resurface do a proper brake bed procedure immediately thereafter.
Do a search for a member called dzeckhausen. He is the all-knowing forum member on brakes.
|
VVV90 is right. The rotors on the 300C do not warp easily. Certainly not in normal street driving.
Here is the article on bedding in brakes. You can try this and see if it cures your pulsation from material transfer.
http://www.zeckhausen.com/bedding_in_brakes.htm