|
Car Still not fixed!..
about 2 weeks ago I developed a problem where my car would have a major loss of power off the line, multiple hesitation while accelrating acting as if the car was jumping on and off the gas and sudden power at 4000 rpms..
They Data logged my computer and decided that my PCM should be replaced. after replacing the PCM i recieved a call saying my car was fixed. I pick up my car today and take it for a drive car. everything was good and great until the car heated up and the same problem started to occur this time there is less power surging jumps but and more loss of total power and the jumps are still there.. they told me to take the car home and they will call Chrysler headquarters for another solution. this would take at least a week to get done!
I am looking for you guys to chime in and help me fiqure this out... here is everything I can put together so far....
while the car is operating at 200 degrees it is a beast peels tires for miles fast as hell even better than before and i really like the 4.08 softwhere because now it says upsift on the evic before right before redline. the car then proceeds to heat up not to the usual 210 or 220 but it is right at the 3rd line in the heating display on the dash the line between 200 and 260... before this problem my car whould never operate this HOT and would usually stay around 210 220.. the car only has the symptoms described when hot. Also if i turn the heat on it does not cool the car down anymore and sometimes it actually rises the temperature of the car... Could my thermostat be bad? do you think this is computer related? keep in mind my PCM was 4.05 and now 4.08 software and still have the same problem. Please help guys I just want my car fixed!
|
