[mspeasl]

Gang,

In reading through the posts discussing this question I may have missed what I am about to say. But, does anyone have any idea what .7mm amounts to. What it amounts to is .0275509055 inches. That is a little more than 3/128 of an inch when you look at a common tape measure. Plus that is across the diameter. In other words that’s from one side of the bolt circle center line to the other side. So that is about .013 of an inch per side. If you mount the 114.3 wheels on your ride and do the star pattern like you should when you tighten them, you'll never notice the difference. The wheels will tighten on center like they should. The OEM hardly has tolerances this close. Flame suit is now on.