Quote:
|
Originally Posted by 300C2NV
Hey guys, I just recieved my woodkit, and started putting it on, and only got the driver and passenger side doors done before I ran out of adhesion promoter. I went to all the stores around here and no one even knows what that stuff is, so I ordered a box of the packets of 3M adhesion promoter (hopefully it's the same as the tube) but I was just wondering if this stuff is 100% required for every piece. Thanks!
|
Clean real good first with isopropyl alcohol. Let area dry. Use adhesive promoter on the small strips on the door and where the pieces bend to fit on the airvents on the left and right sides of the dash top, etc.
Not really needed for the straight dash pieces and consoleexcept for those that have to bend to fit the curves of the console.
MOST IMPORTANTLY BE PATIENT
I got the 179 piece kit. It took me three Saturday mornings 2 hours each am to finish. Line up and do dry run before peeling and sticking so you know exactly where the piece is going to line up.. Once it's on, IT's ON!
Chas
