Springs - options for not too low :)

[Wizo]

I have done my research - I have called a few manufacturers direct to find their spring rates compared to stock.

I need a spring that will give me no more than a 1 inch drop all around. Most seem to get me 1.3-1.5 drop front and a little more or the same in the rear. Does anyone know what the mopar springs will get me?

I am afraid to go Lower than an inch because of loosing my ride even with a progressive spring. The other thing I have realized is that some manufacturers have a different part number for 2013 models. I am not sure if that means there is a difference but Eiabach states they have stopped merging cars together and will have different part numbers for a 300 and charger and other models.

Pleas help with mopar information and anyone who has lowered a 2011-13 model

[Patdow1]

Here you go!
Lowering Springs

If you want exactly one inch I would reccomend getting a set of coilovers (KW's, BC's, ST's)

Good Luck!

[Wizo]

Thanks for your help - I am going with mopar springs which is only a 1 inch drop. Should give me what I need without being too aggressive.

[Patdow1]

Make sure to post pics! I haven't seen any cars dropped on Mopar Springs yet. There is one on Eibachs that doesn't look too bad a little too high in the front for my taste.

[Wizo]

Please show me the eibach one you are talking about - I keep thinking an inch won't be enough

[Patdow1]

Here you go!

2012 Chrysler 300c with Eibach springs - YouTube

2012 Chrysler 300c with Eibach springs - YouTube

[smoove7410]

You can see the mopar springs in the 2011 spring fest picture thread. Mopar had a black 300c that was running them.

[Patdow1]

Is this the car you were refering to?