This is a FREE mod that takes less than 5 min to complete.
You can finally keep the ugly egg yolk from distracting from the pretty Halos.
I have to give credit to my buddy Greg from LXforums for the info and pics
Here is an inexpensive way to modify the stock 3457 bulb so just the signal filament of the bulb works. Just snip one of the exposed wires on the bulb socket:
There are 4 wires, 2 at each end.
The two outside wires are the High intensity filament, the two inside wires are the low intensity filament. Just pry up one of the inside wires (does not matter which end) and snip it off:
