|
Finally I Did The Oem Hid Retrofit - Part 5
The left one is the OEM ballast and the right one from the SRX. See that the OEM is slimmer so I have no space to place it under the assembly and placed it in another site. Remember that the cable connector is only 12" long.
The left one is the halogen projector and the right one the HID.
I installed the ballasts on the side of each top portion of the front fenders
 |
__________________
2005 300C HIS, DLR, WOOD TRIM, D2S HID, PILLAR SET, AIR DEFLECTORS, LIP SPOILER, TINTING, E&G GRILL, LOWER MESH INSERT, PAINTED ENGINE COVER, VES, AIRHAMMER, UC, UNDERHOOD LIGHT, BFG KDWS 245/55/18, PEDALS SET, CHROME TAIL BEZEL
2005 300C HER, DLR, OEM HID RETROFIT, PILLAR SET, AIR DEFLECTORS, WOOD TRIM, LIP SPOILER, TINTING, OEM CABIN FILTER RETROFIT, E&G GRILL, LOWER MESH INSERT, PAINTED ENGINE COVER, VES, AIRHAMMER, UC, UNDERHOOD LIGHT, BFG KDWS 245/55/18, PEDALS SET, CHROME TAIL BEZEL
Last edited by HERMINIO : 03-11-2007 at 02:41 PM.
|