[jeffp]

I never used clay before this car, and was amazed by the difference from before to after. Only took about 1/2 hour to clay the whole car and the feel to the hand was much smoother. I suspect some of the wax haze may be due to roughness in the finish. Very little effort is needed to get the wax off a smooth surface. Try using clay on one section and then wax over it. I'll wager that the clayed area has less to no haze. (I used Klasse glaze [x3] after the clay followed by a carnuba paste wax. Has held up great all winter so far, but I haven't used soap to wash it, only water and the dirt and salt just slides right off.