Quote:
Originally Posted by tommyz
good enough for jeremy and meister its good enough for me too....
thanks guys
ps. will this work with a hypertech prog. ? ?
|
Any time tommy - always glad to help.
Not sure about using *any* programmer with it. For one thing, I'd think it's likely to reject the ECM as not the same one it was first set up with/for. And then there's the concern about "dumbing down" the B&G.
If you choose to try it, I'd suggest you tread very lightly and only change some item of little or no consequence to test it first. If successful, continue to move slowly and cautiously.
Do report back if you try it.
Quote:
Originally Posted by CplDaugherty
Good info Meister... I may look to purchase a spare ecm and have it flashed. I heard this flash is the way to go, esp w/ a heads and cam package.
|
Absolutely correct, CD. Once cooler weather set in I was in two footer's hades just keeping my cammed car running at a light. And then along came the B&G flash and magically made all the bad stuff go away. And the car run like a raped ape to boot.
Can't say enough good about either the B&G flash *or* Jeremy / Power Ported Performance (PPP).
