how to build voompc...
im going to try to build a custom case with plexiglass after this...
so i can fit everything behind the screen... then i wouldnt need longer cables...
ill have to put voompc underneath the driver's seat or the passenger's seat...
the screen...
i took it apart... be careful not to rip any cables...
try not to squeeze the screen too hard...
im still waiting for epoxy kits and some tools i ordered online... around $50 shipped.
i went to homedepot the other day and i got sandpapers 36grit, 100grit, 220grit.
wetsand 600grit and a plastic primer... total $13.00
i also ordered wetsand 2000grit on ebay for $2.00 shipped
there are about 4-5 parts... dont lose anything or else ure focked... ^^
oh... i got this adapter on ebay... this doesnt fit on voompcs...
this is for the 2.5" laptop hard drive... motherboard requires 3.5" ide cable...
another tip when shopping for ur parts on ebay...
CHEAP doesnt always mean good...
try to avoid buying stuff outside of the United States...
i noticed a lot of people are having problems w/ chinese sellers...
Watch out guys... be careful...
compare the resolutions with other products...
make sure it has pretty decent native resolution... etc... research lil bit...
more pictures...
long cable connects power and speakers...
left tiny hole is for radio tuner... well i covered it up w/ my arm...
i should use plastic cutter... it's melting cuz im using metal cutter
bah~ o well...
i did this cuz on the back there is screws to hold the climate control...
plexiglass will be used to hold the screens... i decided to use velcro to stick it on...
it will be screwed onto where the radio screws goes...
i want to keep everything oem... cuz ill probably sell the car later on...
if i want to keep or sell the carputer i can just pop the radio back on...