|
OK-- I am happy to report this is the perfect solution to the "fast flash" problem.
Connect one of the "equalizer" wires to each of the short pieces of wire you left coming out of the ICM plugs (see pic).. again use solder and heatshrink (note the red heatshrink in the pic).
Connect the 3rd wire (black) to ground. The shiny FCM case looked like a great candidate! So I soldered (and crimped) a lug onto the black wire-- and put it under the bottom left screw holding the FCM to the ICM. The wire lengths are perfect as is.
I just double sided taped (supplied) the SDC equalizer to the mount for the FCM/ICM on the left side (see pic). It is pretty hidden from sight and barely fits.
VIOLA!!
That's two projects done before noon!!!
MC
|
__________________
Bright Silver 2006 300 Touring "El Patron"
Stealth Auto projection headlights, Kayee
mesh Bentley grill, SilverStar/Stealth bulbs,
RAQ radio upgrade, Sirius, auto headlamps,
lip spoiler, de-emblemed and "B"-emblemed,
tint, clear side marker lights, clear K2 LED
Altezza tail-lights, the "Luke" subwoofer
solution in rear armrest, Bob's Blasters dual
exhaust, Eonon 9.2" headrest LCDs, Sony
portable DVD player (center console).
Brilliant!! 
Last edited by italianguy63 : 02-17-2007 at 09:56 AM.
|