Quote:
Originally Posted by EXTREME-SRT8
This is an old thread, but well worth a BUMP i think!!
I'm planning to do this soon as i get some supplies in! Any progress on teh both on low switch, JT?
|
The "Both on Low" would only use relay #1. It runs both fans in series. The way that the stock fans work, both come on low with relay 1 engaged, one on high with 1 and 2, and both on high with 1,2, and 3. SO, if you want the Both on Low option, do not engage relay's 2 and 3.
Quote:
Originally Posted by GEN XER
He said he did not know if it worked on the SRT's. I would wait to see what is answer is regarding the circuitry.
I have completed my Fan Mod design and was going to post in the morning after taking a quick peak at an SRT8, but since there has been a lot if interest....
** PLEASE NOTE THAT I HAVE NOT LOOKED AT THE SRT WIRING TO SEE IF THIS APPLIES OR NOT **
|
This works for the SRT's as well, but the wiring is different colors (as heavier wiring is used on the Stock SRT wiring harness for the harsher conditions).
Hope this helps.
jimt