[mebe]

ok so i ventured on my own and did this tonight.. I found you dont have to drill anything out the rivets are just star screws that screw out. (now i dont know why but maybe thereis a difference between Non C and C). @nd the triangles are a muthafer..lol.. But really be VERY VERY careful with these things they bend easily while pulling them out. 3rd Like Luke said in step 7"There is a metal tab lock that is located in the back corner of the door panel. Its right under where the triangle pillar is. You have to push this in with either a screw driver or some pliers. DO NOT PULL HARD ON THIS YOU MAY BREAK IT OFF!!" This will break very easily and it doesnt look like its replaceable. This is the area that i really failed at it is hard to tell which way you actually have to press or pull but i broke one, got lucky on the other.

All in all i would rate this 45-55 minute job a 2.5 out of 5 in difficulty. ONLY due to this fantastic write up.