View Single Post
Old 04-26-2007, 11:45 AM   #6 (permalink)
Humongo
Senior Member
 
Humongo's Avatar
 
Car: 2006 Chrysler 300C SRT8
Join Date: Feb 2006
Member Number: 4980
Location: Houston Area
Trader Rating: (0)
Posts: 314
Quote:
Originally Posted by Oldjoat View Post
Cali
If both outer edges are worn you need to put more air in your tires. If the wear is only on one side of the front tires you need to get the front end aligned. I run my tires with 32 to 35 lbs. I got 37000 miles on the Cont. and just purchased new Goodyear Comfort Treds.
Bill
Yeah, I thought that too and it did not work.

I have an SRT8 also Cali and I noticed that my fronts were cupping/dipping/scalloping on the outside edges also. I jacked up the pressure about three pounds for a couple of thousand miles and it did not help. I went down to my local alignment shop two weeks ago and the guy said the tow was out about two ticks on each wheel.

My advice to anyone buying a C-SRT8 is to have the dealership check the alignment before you leave with it.
__________________
If my big ole grill looks too close in your rear view mirror, you're going too slow!
Humongo is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote