JMatt,
Disconnect the neg battery terminal. Pop your hood and remove the plastic cover over the PCM, This is on the left side under the hood very back. Take out the 1 bolt holding the PCM in. Pull the old PCM out. The plugs are colored for easy remove/replace. Slide the red tab back and unplug all 3 plugs. Remove the 2 bolts off the old PCM holding the bracket on, Put the bracket on the new PCM, Plug the 3 plugs into the new PCM, secure the red tabs agains. Slide the PCM into its hole and put the last bolt in. Replace Plastic PCM shroud cover. Connect neg to battery. Your Done.!! Good Luck
