Quote:
Originally Posted by aj510
hi,
I've got a couple of problems with my DHC-2000.
When I try to read tank pressure it displays 'EEE'
Also when I try to set a height for the 'M' button it doesn't seem to remember the height correctly, where as all other buttons are fine no matter what height I set the memory to.
Any help here would be greatly appreciated.
|
If your M is too close to the L or H it may need to be set further apart.
Quote:
Originally Posted by LAIDBACKC
Any problems with the controller has always seemed to be a ground problem... go back and make sure the sensor on your tank is grounded reall well
|
Thats correct, it sounds like the tank sensors isn't grounded good. Make sure that you have the "2" post one in the tank and one of the posts are grounded.