[GSM]

I would like to explain to everyone how much R&D went in to what we are offering as our half shaft upgrade.

We have worked very close with the SRT8 Drift Car and this is were we tested products.

over a year ago we had 2 different very prominent shops make new half shafts out of the best materials, what we found out was that on the LX cars the output shaft and c/v were smaller in diamiater and now with the stronger shaft we would strip the hub's out. So we cryo'd ,hardened ect..ect ..the hubs with the same result.

We installed our 650hp half shaft conversion and we were in business, no breakage through 3 events...

We then Supercharged the SRT8 Charger drift car and now the hp was at 825 flywheel and at the first event we broke a "cage" on the c/v's.

We then installed custom made 300m cages on all the c/v's and went back out to the next event with no problems and have won and run several events since with no problems.

To Date the product is been produced in small runs and we wanted to get it out to the big guns for street/strip testing which has gone very well.

We have a limited number of sets now and we will have geared up to produce a larger run in the up coming weeks. The learning cure has been very steep on this product you can not just install a shaft.


Scott
GS Motorsports
562.777.1075