[3Shizzle]

i bought the complete kit and installed it my self. it's pretty straight foward. just remove the front splash guard under your engine. remove the cover and install the new ones thats cut for the fog lights. your bumper already has the mounting points for the fog light, just screw them unto the existing housing. pop the light switch out using a small flat screwdriver and then install the new switch. you'll have to wire up the harness/relay to the underhood fuse box. i cant exactly remember where the fuse location goes but it's on the instruction sheet thats provided. after you finish you'll have to take your car into the dealer so they can program it into the computer and you're good to go. hope this helps.
PS: i wouldnt try to wire it up by tapping into the headlights or anything b/c it's a new car and you dont want to "rig" it. it's not hard it will take about an hour or 2 the most to install it.