Quote:
Originally Posted by NM08SRT8
No, I believe the 300(c) is ok. Don't quote me on this tho.
Question about pushing the pods back in... On my Integra, you had to open the bleader screw on the caliper so the fluid exits as you retract the pod(s) on the caliper. I noticed on that write up, it didn't mention anything like that. So does this mean it's not required to do so? If so, does this make it harder to push them back into the caliper since there is more resistance?
TIA
|
No, there's no need to open the bleeder at all. You'll find these are the simplest brake pads to install. Takes about 4 minutes per wheel.
Bernie