Quote:
|
First, turn the wheel all the way to the right. Go to the driver's side wheel well and remove the tabs holding the liner to the metal fender. You'll need to remove four total pins. They can be reused if you don't manhandle them too much...otherwise forget it. You'll need to replace them. After removing the plastic pushpin tabs, seperate the plastic liner so you can get you hand behind the light housing. The back of the bulb and the plug harnesses are easily seen and reached. Pull out one bulb, put in the new one and replace the plastic pins. Repeat the other side the same way but turn the wheels all the way to the left this time. I replaced both in less than ten minutes. Have at it!
|
This is exactly how i did it today. I had a little trouble mounting the aftermarket fogs but all in all it wasnt too bad. I'll put some pics of the finished process tomorrow. Thanks for the help!