This is what was told to me:
Part Number: C2R-CHY2 (this is for replacing the head unit and still maintaining the Canbus integrity of the car (otherwise you will have a butt load of MIL codes)</SPAN>
The C2R-CHY2 allows you to replace the factory radio in MSCAN Dodge and Jeep vehicles. The C2R-CHY2 also turns on the factory amplifier via CANbus information. The Steering wheel controls can be retained using the SWI-CAN2 and a radio specific SWI-interface, once again plug and play when used with the C2R-CHY2.• R.A.P. (Retained Accessory Power) +12v output.
• VSS output.
• Illumination output.
• Parking brake output.
• Reverse trigger output.
• Digital amp turn-on.
Compatible Vehicles:
2007-2008 Dodge Nitro, Jeep Wrangler
2008 Caravan, Town&Country, LibertyLatest Revision: 1.1.4Instructions:
c2r-chy2
If you DON'T have the factory AMP then this is the part
Part Number: C2R-CHYNA </SPAN>
Part Number: C2R-CHYNA </SPAN>
The C2R-CHYNA allows you to replace the factory radio in Chrysler, Dodge and Jeep LSFT CANbus vehicles. This interface is designed the installation of non-navigation radios into vehicles without a factory amplifier. The Steering wheel controls can be retained using the SWI-CAN/2 and a radio specific SWI-interface, once again plug and play when used with the C2R-CHY.• R.A.P. +12v output.
• Illumination output. 2004-2007 Durango
2005-2007 300, Magnum, Dakota, Charger, Grand Cherokee, Commander
2006-2007 Caliber, Ram, Mitsubishi Raider
2007 Aspen
2007-2008 Compass, PT Cruiser, Patriot, Caliber, RamLatest Revision: 1.4.1Instructions:
c2r-chyna