04-02-2008, 07:17 PM
|
#5 (permalink)
|
|
Super Moderator
Car: 2005 300C SRT8
Join Date: Feb 2005
Member Number: 1493
Location: Why I'm at www.300cforums.com of course!
Posts: 14,448
|
|
I did the same thing using a template from Mr DJ to trim the sides, but because mine was already screwed on I carefully lined it up and used the same holes in the fascia by drilling new ones in the holder.
I found it a lot easier to use a large pair of scissors rather than the Dremel tool. The edges were a lot cleaner.
Bernie
|
__________________
Check out our 300Cforums.com 2009 Calendar Contest --->HERE
 
2005 300C SRT8 - #72 of 252 (excl. 11 pilots) - #10 of 35 Canadian SRT8's built
2008 Harley Davidson FLSTF Fatboy - Vance & Hines Big Shots STGD with FuelPak tune.
2008 Jeep GC SRT8 - Custom Build/Custom Delivered by SRT - 1 of 1 in Canada
|
|
|