|
VERY EASY... 3.5 hours or so...
First I had the Sonar LED lights, and they were smoked from them I think they were like $150.00 on Ebay.
1. Tape off the inside while they are on the car. (Start with the curve part first, get it where you want it, same on both sides preferably).
2. Remove the lights easily only 3 plastic nuts.
3. Sand where you are painting with 400 grit to get the plastic scuffed up.
4. Use scotch bright or a san paper to smooth everything up so its not quite so rough.
5. Use a spray Adhession Promoter from Auto zone made by duplicolor.
6. Spray on 3-4 coats of paint (I used the one from the dealer its like $12.00 for a small can) get a good cover, and keep checking to be sure you didnt miss any spots. You dont want to be able to see thru it.
7. Clear coat heavily I just used one from autozone Duplicolor but I am sure you could get one from Chrysler for more money.
|
__________________
Pedders Online Sales Specialist Call Paul (623) 341-9797 - Silver 300C SRT8 Grey roof and headlights, Pedders Track 2 Suspension, Diablo Predator, Magnaflow Hi Flow Cats, GSM Spacers, Blue B.T. parts, AFE 2 Intake, Grip Grille, SRT pedals, Magnum SRT Wheels, Zapco Amp, Dynaudio Mids/Highs, Image Dynamics subs
|