like mine, eh?
ok. well there is ALOT of adhesive behind that bad boy. I found that the easiest way to remove the wing was to heat it and use some fishing line. The tricky part is trying to get the fishing line between the two pegs that stick out behind the wing. After I used the fishing line on both sides I gently pried up one side until I could lace the fishing line on the other side of the peg. (i dont know if you can picture what I am saying) but once you start doing it you'll find your own little way to make it easier. Just be careful as to not bend the wing too much; it will crack.
hope this helped!
MO