No, the front seats are held in by regular old metric bolts, 2 in front and two in back on either side. The seat belt is connected with a reverse torx bolt. The proper socket is available at Sears etc...
BTW: If you do remove the front seats you may very well get an intermittent air bag warning light. That can only be corrected by a visit to the dealer to get the airbag sensors recalibrated. And whatever you do, DO NOT sit in the seats when they are out of the car. You will screw up the sensors, and may need to replace them.
In case you haven't figured it out, I've had my seats out a few times
