Quote:
Originally Posted by HEMI4ME?
Well I was thinking of keepin them up front but THEY ARE HUGE... Like 7.5" by 4". I was just in the car... I was thinking (and this sounds like a terrible idea) cutting the carpet in a rectangle the size of the Xovers, and mounting them as you look in the car on the right, and left side of the tranny.
Basically facing you when you look in the car door, and under the shifter...
I would love to keep them up front to save the wire, and I have the 4s, and tweet wired ready for the xover, but they I think are only like 10 feet so not enough room to get to the trunk.
Any suggestions? I was almost thinking about putting them on a piece of wood, and mount them where the factory amp was located?
|
In an older install I had back in the 90's I mounted the crossovers in
the trunk, but my current install I have a crossover on the passenger
side above the kick panel, and on the driver side on the shelf next to
the stock amp. These polk crossovers are not small at all for a 2way.
I haven't looked under the seats, but that may be a good spot for them.