Quote:
Originally Posted by AACstyle.com
For the foglight halos be sure to use the supplied heat shrink to cover the connector between the inverter and ring. If moisture gets in the connector the ring will stop working. Remove the connector, blow it out with compressed air and reconnect. Then use the heat shrink to prevent it from happening again  |
Yeah well one of my inverter is dead DEAD, i tried many things, used another connector, try to use wire to wire without connectors but still no result, I removed my other inverter and tried and worked just fine. When you look at the inverters theres a gap at the end where the 2 screw holes are, i suspect water infiltrated there and damaged it. i have the V1 of those inverters and i suppose the v2 have been fixed.
