Quote:
Originally Posted by ixius
Hey Cool,
Again, thanks. I have decided I like the 3sixty.2 system and will likely invest in this, my only other question is with all of these systems (except the pac since you say it is plug n play?) will I need to do any cutting of the existing wiring?
Additionally, to confirm. If I do not bypass the amp your saying I will be able to use the volume control, but if I do bypass the amp I will likely lose the volume control however my other controls should continue working?
The volume is actually what I need to keep.
|
You will have to do some cutting/splicing to install the 3sixty. But
it would only be to run the outputs from the stock amp to the 3sixty,
and from your amps you would need to run speaker leads back to
your speakers.
About the volume control, sorry for adding confusion, but you will
NOT lose the volume control with the 3sixty. One rule to remember,
if you leave the amp in and leave it connected, you must do all
wiring on the OUTPUT side of the amp.
If you tap right behind the radio, you will need to unplug the harness
at the amp, effectively bypassing it.
My own opinion is if you bypass the amp completely, you don't really
need any of the units we've been discussing. That is a different
discussion, however.
Bottom line, if you take the outputs of the amp and use the 3sixty
to sum them, you'll be fine.
» Sponsor Links
