Content Wrapper

[300CAWDDUB]

Originally Posted by Cool_V_300C

You will have to do some cutting/splicing to install the 3sixty. But
it would only be to run the outputs from the stock amp to the 3sixty,
and from your amps you would need to run speaker leads back to
your speakers.

About the volume control, sorry for adding confusion, but you will
NOT lose the volume control with the 3sixty. One rule to remember,
if you leave the amp in and leave it connected, you must do all
wiring on the OUTPUT side of the amp.

If you tap right behind the radio, you will need to unplug the harness
at the amp, effectively bypassing it.

My own opinion is if you bypass the amp completely, you don't really
need any of the units we've been discussing. That is a different
discussion, however.

Bottom line, if you take the outputs of the amp and use the 3sixty
to sum them, you'll be fine.

What he said.

Ive heard a few different cars with a 360 set up and it sounds great! (as long as the amps and speakers your plugging into it are of good quality anyway)