Quote:
|
...could you post a photo of your module installed? ... do you think there is enough room for the drl unit?
|
Photos? I'll try, but be aware that my 35mm camera uses 20 shot rolls minimally, and that takes a bit of time to get a roll ready for processing. Only digital camera I have is in my phone; it isn't sharp enough for that kind of work.
That perpendicular bracket (wonder why it's there? I have just about all options on the "C" except blockheater otherwise.) is just in front of my DRL module box location; I tied the shrink wrapped cabled wires going forward to it for dressing and security. The 2 other lines into the power distribution box likewise were shrink wrapped and cabled, tied the loop at the front of that box and then inside the box for taps.
Access to the front power distribution box is a plus since all of the headlight and ignition on sensor taps can be done at the fuses right in that box without having to splice into the wiring behind the right headlamp as I did. It is possible to run the orange line (high beam output) to both headlight fuses in there. My fused power line IS inside the box for weather protection. The wire pigtails from the module are around 18" long so they'll go far themselves w/o extending them. Just stay away from those silly splicing clamps provided in the kit. Never had one work reliably yet.
» Sponsor Links
