Quote:
Originally Posted by coastal21
this might be a dumb question but how do i get to the old wire to pull it back towards the rear seats, where is it even located at, and do i need to splice any wires or does the extension wire just plug right up
|
the extension cable should be plug and play. the sat receiver is located in the trunk behind the left side trim panel. once removed you should see it secured to the inner trunk area with a bracket. simply unplug the antenna and connect the extension cable and run the the front of the car.
note: some people who have been having issues with not getting the sat info to display on their evic have used a 2 way splitter (readily available on ebay) added on the end. plug the single side of the splitter into the receiver. connect the oem antenna cable to one side of the split and the extension cable to the other. this uses both the receiver in the car (for the evic display) and the receiver in the mygig for the sound. its a get around for one of the lockpick issues.
now, if they would just sort out the clock!
