[jhelmuth]

Step 3 – Remove Display Circuit Board assembly



[1] Remove the 4 phillips pan-head screws which hold the board in place (see arrows in pix showing their location on one side).


[2] Carefully pry it forward (away from the mounting) detaching it from it’s connectors on the back side.

[3] Once removed, you’ll note that there is a small black wire harness that has a micro connector attached to the board – remove that from the board by carefully wiggling it from its socket.




OK – now you should have the display assembly free and ready to do some modification work by cutting 4 traces (1 under the display it self of the front of the circuit board, and 3 on the back of the circuit board at the connector close to the long slot opening in the board (access to the Nav DVD reader).