Just added my Rear window spoiler

[PTCSRT8]

I just installed my rear window spoiler and I like how it looks overall. But what I dont like is how I got a little off as I came to the edges and trying to get it squared up. So it is not perfect. It is stuck pretty good, but wanted to know if I pulled it off would I need to reapply more 3M tape and what 3M tape do you recommend. This tape that was on it seems thinner than what I have found and it actually sits in a groove under the spoiler to allow it to sit flush. Any thoughts?

[Sodak]

Looks really good and i'll have to look when i get home ,but i have some 3m tape that is super duper strong.

[silver06hemic]

I think it looks good! You could redo it but getting that tape off will be a PITA... shoot some more shots from the side... love to see some extra shots of it!

[therealfleen]

Can you post up where you bought that from....


Sent from AutoGuide.com App

[PTCSRT8]

I will take some more shots when I get back to house. Thanks for the props. I do like how it looks on there. I got it on Ebay from Shadow Speed. I will get the link. (looks like they are off line until Feb. 17th) It came pre painted and I do have to say it was spot on with a nice gloss shine. Numerous people have bought this one especially the Chargers. Sodak, let me know the part number of the 3M tape when you can.

[Sodak]

Got two differant numbers here so try both ,051131 and 06383,I wanna say i looked it up under the 06383 number.

[17Vvet76]

The # 06383 is the right one. 3M automotive acrylic plus attachment tape, 06383, black,7/8in x 20yd,45mil. it looks ok? SODAK you got it .Good goin'.

[yamabob]

^ Correct! the 6380 series will all be the same the last number will change the width and length of the roll. before re-applying make sure area is very clean and wipe down with some iso alcohol. For additional holding # 94 primer can be used as well