Got those SRT wheels on the 300C...

[snoopdolks]

Hi all. To say that I am delighted would be a huge understatement!
I reckon they've given me a whole new appreciation for my ride - if that was possible.
The handling and feel from the car is so different now and I think the look is pretty good. IMHO.

Thanks for parting with the wheels JAS000.....

Some pics...

Cheers, Sean

[conceptb]

looks very nice. debadge it and you've got a us ver. srt, hehehehehe

[Simans82]

Looks great. Can't lose with the SRT wheels.

[turk182]

Great Lookin Wheels there, makes a lot of difference, you might get more people racing you now as they may think its a srt8

[E55 KEV]

snoop, did you need a spacer to correct the offset up front?

[GoofyTimL]

I will eventually head in that same direction with the Heritage Edition... just probably not until next year.

[E55 KEV]

reportely, there is new SRT styled rim for the 2007 SRT Package. This one will be a better fit and not require a spacer to reduce the offset because the 300C and SRT8 have different knuckles on the suspension.

[Hemi57]

Snoop, looks great .

Now you hear about the spacer .

I guess you will need to look into that eh?

[snoopdolks]

Originally Posted by E55 KEV

snoop, did you need a spacer to correct the offset up front?

Hi there E55 Kev. I guess I wasn't really aware of the need for a spacer. Everything seems fine and the wheels rotate without any rubbing etc but there is some scraping when turning beyond 3/4 lock in reverse that would probably be solved with a spacer of sorts. Do you know where I can get one by any chance? Thanks for the tip!

Cheers, Sean.

EDIT: A bit of searching found this.....answers a number of questions and looks like I'm lucky not to have an issue other than the bit of scraping in reverse. I'll try the local Bob Jane bloke again for the 5mm spacers though and see if that makes any difference.

Midnight Blue 300C w/SRT8 Wheels&Tires

[n4sir msp]

Doing the same set up on my c, however going to powder coat the rims black. PM with the results for the spacer, I guess I will need spacers also. Thanks.