Are there really no low dust replacements???

[headbussaboi]

Or is everyone just looking for ceramics? How about these:
http://rep.racepages.com/parts/racepages/wizard.jsp?year=2006&make=CH&model=300-C_SRT8-001&category=N&part=Brake%20Pad%20Set&dp=true&show dc=true#top
It says SRT8 6.1 chassis.
Anyways, I work for CSKproshop and was wondering what kind of pads we have as far as brand? Because I found some in our computers saying Raybestos manufactured them and they are premium semi-metallic. I'm hoping these are less dusting than our stock pads (even though we have semi-metallic). Here are the part numbers just in case any body wanted to know

PGD1149m (front)
PGD1053m (rear)

BTW, I did check to see if the part numbers from the Limited, Touring, etc. was different from the SRT's, they are different. I should have the pads this weekend so we'll see.

[FreebirdSRT]

Originally Posted by headbussaboi

Or is everyone just looking for ceramics? How about these:
http://rep.racepages.com/parts/racepages/wizard.jsp?year=2006&make=CH&model=300-C_SRT8-001&category=N&part=Brake%20Pad%20Set&dp=true&show dc=true#top
It says SRT8 6.1 chassis.
Anyways, I work for CSKproshop and was wondering what kind of pads we have as far as brand? Because I found some in our computers saying Raybestos manufactured them and they are premium semi-metallic. I'm hoping these are less dusting than our stock pads (even though we have semi-metallic). Here are the part numbers just in case any body wanted to know

PGD1149m (front)
PGD1053m (rear)

BTW, I did check to see if the part numbers from the Limited, Touring, etc. was different from the SRT's, they are different. I should have the pads this weekend so we'll see.

Read this thread:
http://www.300cforums.com/forums/srt...ad+replacement

[headbussaboi]

Originally Posted by FreebirdSRT

Read this thread:
http://www.300cforums.com/forums/srt...ad+replacement

I did. Those are not yet available, are they?

[Rambit]

Originally Posted by headbussaboi

I did. Those are not yet available, are they?

Get your name on the list with Dave when the next shipment comes in. Stay away from the EBC Greenstuff pads. Matter of fact run away from them. Read what Dave has to say about them in post #7 here Has anybody put low dust aftermarket (EBC, Ferodo, Hawk, etc) front pads on a SRT8?

I'm very happy with the C-Tek pads and my clean wheels!!!

Rambit

[headbussaboi]

Originally Posted by Rambit

Get your name on the list with Dave when the next shipment comes in. Stay away from the EBC Greenstuff pads. Matter of fact run away from them. Read what Dave has to say about them in post #7 here Has anybody put low dust aftermarket (EBC, Ferodo, Hawk, etc) front pads on a SRT8?

I'm very happy with the C-Tek pads and my clean wheels!!!

Rambit

OK. Good looking out.
Also, How many miles have you put on the Ctek pads so far? I'm totally jealous of clean wheels on an SRT .

[Rambit]

Originally Posted by headbussaboi

OK. Good looking out.
Also, How many miles have you put on the Ctek pads so far? I'm totally jealous of clean wheels on an SRT .

I've probably got around 600 miles on them now and loving the look of clean wheels all the time. I just washed my car this morning and I could have left the wheels as they were that clean. We all know what they look like after driving 30 miles with the OEM pads. Best money I've spent since having the car. NO SQUEAL, NO DUST, NO ROTOR SCORING!!!

Rambit

[FreebirdSRT]

Originally Posted by Rambit

I've probably got around 600 miles on them now and loving the look of clean wheels all the time. I just washed my car this morning and I could have left the wheels as they were that clean. We all know what they look like after driving 30 miles with the OEM pads. Best money I've spent since having the car. NO SQUEAL, NO DUST, NO ROTOR SCORING!!!

Rambit

Hey Rambit. Remember these pics,lol.

[Rambit]

Haha Mark. Do I remember those pics of yours? Well I used them in one of the SRT Engineer chat sessions. I haven't seen wheels like that in two weeks now and I don't miss them one bit!

Rambit

[vvv90]

[Rambit]

Originally Posted by vvv90

You got yours on yet? I haven't heard anything about them from you Matt. Matter of fact I haven't heard if Mark did his yet either. Damn those pics of your car made me ill. Good luck with that one.

Rambit