need help:Clean Sweep:How to keep factory Nav and UConnect?

[Black 300C]

I'm about to install my stereo system at my shop.
I plan on getting the JL Cleansweep, Subs, and amps, and Headreast TV's, and all new mids and highs while keeping the factory NAV Unit.

Will i lose UConnect and Nav voice and/or steering wheel controls?

Can anyone give me advice on how to install without losing these features?

I've been trying to read about this in the different posts, but i'm CONFUSED... Any Advice will help...

[RF-SRT8]

aloha from hawaii, you can see my work on lxforums under name 808sxt check hawaii site and look for tread "here i go again". well to start what ever you use as far as a processor, go after the stock amp. u connect comes from left dash speaker so go ahead and wire left dash wires from stock amp to the center channel speaker. your uconnect will now be heard from center channel and you will keep all control of your stock nav deck including steering controls. you wont have to connect the remainding dash speakers to your clean sweep. i wish i knew more about jl audio stuff but i never use it. now go ahead and connect the front left, front right, rear left, rear right to corresponding leads on your clean sweep. i personally use all rockfordfosgate and im running the rf 360.2. hope this helps