Quote:
Originally Posted by agent gibbs
Are these Main Beam HID kits easy to fit and are the Canceller Capacitor Decoder an easy fit as well.
Do you just need to change the type of blub you need for your fog lamps?
|
yes, you just plug them in....hardest bit is fitting the left H'light bulb cos your air intake gets in the way
http://www.sylvania.com/en-us/applic...s/lrgmain.aspx
yes...you just cable tie them nearby - if you buy a 'canbus' ready kit, its all built into the ballast anyway, & you dont need a separate canceller
if you change your main beam, you dont
need to change the fog bulbs....but you can also do those too if you fancy
fog light bulbs as standard are 9145 (also called H10).......(all our bulbs seem to have a US number / Euro 'H' equivalent - main beam is 9005 / HB3)
BTW, our standard factory bulbs are 4300k....that means its a sort of yellowish light....the higher up the K scale you go, the bluer the light becomes, but the less 'visible' light it produces (which is why factories tend towards the lower numbers).
Also note you may be better off with 35W kits, as 55W
may overload the wiring
I dont particularly commend this link (theyre all based on chinese kits after all)....its just one I pulled at random, but it gives you the option of selecting for your high beam, or fog light at the correct colour / wattage / canbus cancelling
CANBUS-PRO 35W SLIM HID XENON CONVERSION KIT AC BALLAST | eBay
Linear Mode
