smothing doors, Removing side Moulding/stips

[mms]

Hey I have a black 300c, with tinted windows, upgraded gril, custom badges and upgraded to startech alloys. I am wanting smooth the doors on my 300c by removing the side strips/Mouldings but want to know how the strips are stuck to thecar, is there any holes in the side where they are stuck down like the back angle wing badge or are they just glued on?

Thanks for the help shane

[HEMMISSEY]

Shane all it is, is just some really tough 3m double sided tape..
and welcome to the forum.. you will find lot;s of info on alot of 300 related things

[pimp mobile]

spray wd-40 and let it soak. keep spraying and soaking. the longer it soaks the more tape comes off with the moulding. as you do 1 moulding spray all the others. keep repeating that process. each one will be easier. good luck. it will look great. mine does and it is black also.

[pimp mobile]

i think the trunk wing has 2 holes. so beware.

[mms]

Ok thanks for the help, see the badge that is on the side, saying 300c hemi is there any holes below it or is it just glue.

[croboyz]

It's all 3M tape all the way around escept for the wing emblem on the trunk, gonna do mine in the spring. Will wd-40 doing anything to the paint finish?

[srt8danno]

Welcome to the forums Shane and that badge is also held on with the same 3M tape. If you have any further questions don’t hesitate to ask. Here is a thread that addresses removal of the badges. Hope it helps!

http://www.300cforums.com/forums/aus...=badge+removal

[DUBSTER]

Welcome aboard!!!!! 2 sided tape, very easy to remove!!

[Chip]

Shane,
I just heated it up and pulled it of... starting the removal with fishing line. Then put on goo-gone. Took me about 40 minutes to complete. Share some pics when you get done!

[mms]

Just purchased a bottle of goo gone, gonna get the strips of when ever the bottle of stuff comes!