Removed Emblem from Wing...Wing Off Car

[stealthsrt8]

i know, i know, it's easy to remove the emblem from a wing when it's NOT on the car. i thought i'd post some pics in anticipation of the BT emblem release. after doing this, imo, you should get a new wing, replace the emblem, then mount on the car.

so, i did my trademark "apollo 13 recreation", here we go:

front (notice the crack in the emblem, decided to take pics after i started for my forum buddies)


back (notice the alignment pins)


poking a hole through the double sided tape to "pop" the emblem out


emblem cracking in 1/2 from the enormous pressure i'm applying (not really)


1/2 emblem removed


other 1/2 removed


totally removed


double sided tape removed


two of our supporting vendors, wyckoff and moparsupercenter have the wings. p/n 4805988ab

[D's300C]

good write up, esp with the new BT emblems due out soon.

[300 Addict]

Very nice writeup! Great step by step pics too!

[Mr. iNCREDIBLE]

wait, did you get your nails done between the first and last picture? looks like you went and got a manicure before taking that last pic...

[D's300C]

Originally Posted by Mr. iNCREDIBLE

wait, did you get your nails done between the first and last picture? looks like you went and got a manicure before taking that last pic...

I was just about to post about that. lmao

[stealthsrt8]

Originally Posted by Mr. iNCREDIBLE

wait, did you get your nails done between the first and last picture? looks like you went and got a manicure before taking that last pic...

glad you noticed...i sure did!!!! j/k. wifey was helping me so i just asked her to hold up the wing....i should have done that for all the pics because i'm not a hand model (no need to comment further on that).

[DUBSTER]

SEWEEEEEEET!!!! Too bad I can't do that to my wing. I will have to figure out something.

[D's300C]

Originally Posted by DUBSTER

SEWEEEEEEET!!!! Too bad I can't do that to my wing. I will have to figure out something.

might have a possible solution for that DUB, in the US we have this tool you can buy on tv for pulling dents yourself. it uses a suction cup, I think its called pops a dent or something like that. If you could get one, then use a heat gun on the emblem to soften the tape, then use this thing, it might come right out.

[DUBSTER]

Originally Posted by D's300C

might have a possible solution for that DUB, in the US we have this tool you can buy on tv for pulling dents yourself. it uses a suction cup, I think its called pops a dent or something like that. If you could get one, then use a heat gun on the emblem to soften the tape, then use this thing, it might come right out.

That is a great idea as well bro! Thanks!!