Anyone Install the SRT8 Front Fascia on 300c yet

[MoparKid]

Anyone Install the OEM SRT8 Front Fascia on 300c yet

I heard this is not a kit and does not come with any instruction or hardware for the install

Does anyone know how easy this is to install and what is need

I would apreciate it.

http://www.wyckoffchryslerparts.com/ch30srfrlofa.html

[crhemi]

Its real easy, 4 hands (preferably two right and 2 left) drill, screw gun, done.

[MoparKid]

Originally Posted by crhemi

Its real easy, 4 hands (preferably two right and 2 left) drill, screw gun, done.

are additional parts needed beside the lower fascia

[3 CNOTES]

Originally Posted by crhemi

Its real easy, 4 hands (preferably two right and 2 left) drill, screw gun, done.

Are these not 3M stick-ons?

[HEMEEE]

Originally Posted by Bus Rydr

Are these not 3M stick-ons?

Bus Rydr Only the decklid spoiler is designed to be attached with 3M tape. If you're question is in regard to the lower chin spoiler (valance), the SRT8 fascia has slots designed into it for attachment points.

MoparKid, I'm not sure what you're attempting so if I'm misunderstanding, please disregard, but I believe -don't quote meee- that the only difference in the SRT8 fascia, compared to the C, is the slots as described above. If what you want to do is add the chin spoiler (valance) (I love the idea BTW!) it may be worth your while to try creating attachment points on your own fascia rather than go to the added expense of a new fascia just for a few 'holes'. I didn't search, but I do not recall reading anything here about anyone having done this on a C yet, maybe someone will chime in and post a "How-To" that we can then place in the FAQ forum (hint-hint).

You are correct, it was pointed out by Wyckoff, that the fascias and valances are not accessory add-ons, they are OEM replacement parts, which means they do not come with mounting instructions or hardware. Also, if memory serves, these parts originally only came unpainted. I believe they can now be ordered pre-painted, but only in black or silver, possibly silver steel now as well. My recommendation would be to call Jeff at Wyckoff to verify and gather as much info as possible before deciding how to proceed. If he can't help you with some of the info, ask for their body shop.

Good luck, hope this helped, this info is only to the best of my knowledge so do your homework and let us know how it goes

[apbrian112]

i think it'd be easier and maybe less costly to purchase a VIPedition front lip... just another option if you want to go with the clean subtle look.

[HEMMISSEY]

^ then again, he would have to purchase the rear as well to make it look right all the way around.. you can get away without the side skirts.. You want a clean factory look? go with the the Srt8 lips.. you want that clean, yet "noticable" look, go with the VIP! you can't go wrong with either one, they both look dam good..

[bigwise1]

bumping this. just wondering if anyone has done it yet and what were your experiences?

[mjkinga]

Originally Posted by MoparKid

Anyone Install the OEM SRT8 Front Fascia on 300c yet

I heard this is not a kit and does not come with any instruction or hardware for the install

Does anyone know how easy this is to install and what is need

I would apreciate it.

http://www.wyckoffchryslerparts.com/ch30srfrlofa.html

The dealership hit a curb with an SRT8 and it was half off. The only thing I saw was 3M tape and I thought how cheap it was for an expensive car.

[bigwise1]

has anyone actually installed these?