How do you get a print off the factory Service Manual cd?

[CJ7VFR]

I have a question for anyone how has bought the factory Service Manual
on CD.

I bought mine, and its great, but I can't seem to get it to print any of the
pages I want.

If I go to the print icon, and try to print any of the pages I want, I keep
getting prints that are almost all black, with just a hint of the page
on the top and bottom of each sheet of paper.

Is there some way to print from the CD? Or, because its copywritted, you
can't make any?

This is just weird...

Jim

[Tasha]

I can print just fine...check print setting.

[CJ7VFR]

My general print settings seem to be fine. I can print from other files, but for some
reason, these prints keep coming out all black.

Is there any other print settings within the cd that need to be turned on? If there
is, I can't find them.

Jim

[ResumeSpeed]

Have you gone through the "Print Setup" in Acrobat?

[CJ7VFR]

Yes, I did that. But, is there any settings that maybe I missed in the set-up that
should be turned on? I am not the best at these things, and its highly likely that
I have something turned off that should be on.

If anyone has any clues for me to look for under the page set-up, I am all ears!!

Jim

[Tasha]

No particular answers but...printing is a very complex task.

You need to have a bunch on fonts on the pc.
What version of Acrobat do you have...try an update.
It is NOT the cd.
Can you print other pdfs ok?
Can you print any part of any page ok?
The higher the print resolution the more chance of NOT being able to see print...black may appear gray.
Set print resolution to a lower, ie, 300 x300 setting...
(this is because you are using less dots to make a character, so it appears washed out.)..
Do you have another prg that you can load a pdf in?
Humm...

[CJ7VFR]

The disk actually came with an updated version of Adobe Acrobate to load, I think it
was version 5 of the reader, so I am pretty sure I have the latest version.

I can print out other pdf, txt and other types of files o.k. Its just the pages that
I try to print off the disk that come out as solid black, with just about an inch of
the page you can read at the top, and an inch at the bottom. The funny thing is,
the blacked out part of the page is not straight across at the top and bottom of
the page. The blacked out part starts in the upper and lower corners of each
printed page, and it curves twards the middle of the page about an inch down from
the top, and an inch up from the bottom. The black pattern resembles an open book
kind of, and it blocks off the entire center section of each page.

I am going to bring the disk to work, and see if it prints off of my computer there. If
it does, then it has to be something I have set-up wrong at home. If it still blacks out
the pages, then its got to be the disk not letting me print. Does that sound like a
logical answer?

Jim

[C-Man]

Version 7 is the latest Adobe Reader. Sounds like you have a bad driver. I would install a new version of Adobe Reader. If you can print it at work, then definitely reinstall Adobe.

[frank29]

Go to adobe.com. I spent just enough time there to confirm you can navigate to a support page where you can use a search function. Good luck.

[CJ7VFR]

Thanks for the info. I will try load up the newest version 6 and see if that is the
problem.

It is weird though. The disk says to use version 5 or higher, and it gives you version
5 to load.

Once I try it tomorrow at work, I will let everyone know what happens.

At first I was thinking that the disk would not let me print any pages because of
the copyright it has on it. But you guys/gals obviously can print from your disks, so
its got to be something on my end.

Jim