Setting Seats/Stations/Steering Wheel

[Pooj17]

Ok, so if this question doesnt have me pinned as a newbie. When purchasing the vehicle, the dealer made mention that on the drivers side door there is a set button and a 1 & 2 so you can set the seat/stations/steering wheel etc to driver 1's liking and then again for driver 2's. I know its probably grade school but how do you do it, for the life of me I canot figure it out!!! Lol...

[mouserider]

You just adjust and set everything the way you like it, press the S button, followed by the "1" to memorize for setting 1 or the "2" button to memorize setting two within 5 seconds.

If you want those settings set to a particular keyfob, you can as well by doing the above then followed by the "Lock" button within 10 seconds. Make sure the key is not in the ignition when you do this.

To recall the memory, just press "1" or "2" or if you've paired with your remote, it will set it when you unlock the car with the appropriate remote.

It's all covered in the manual BTW.

[Pooj17]

make sure the key is not in the ignition the entire time? Thanks!!!

[mouserider]

Originally Posted by Pooj17

make sure the key is not in the ignition the entire time? Thanks!!!

No, the key just can't be in the ignition when you're pairing the key with a memorized position. (It's worked for me with it in so it might just be one of those precaution things that they put in the manual)

The memory system also will not RECALL when your seat belt is buckled, you'll get an "ding" and a message.

BTW, you can take your time adjusting stuff, the 5 or 10 second I listed starts after you press the "S" key.

[RCSRT8]

Thanks for reminding me that I need to reset my seat again. Damn cleaners moved my seat around again.