GS Kit help needed

[rodrigomorejon]

Hi members, I have installed the GS Motorsports kit, all working fine but there is no pressure on manifold, even when WOT there is only vaccum, all the air goes out throught the Blowoff valve, this valve do not close the piston because it do not receive positive pressure from the hose coming from the manifold, this kit work in the way that you cannot install any part in wrong position, all parts only fits one place, the car turn on and run very well but NO positive pressure from the compressor, just a lot of air going out throught the blowoff valve. Does anyone know what can I do in order to get pressure inside the manifold? When I put air pressure on hose toward the GS Fuel box the engine die presuming that the GS fuel box is working because supplemental injectors fill the engine with gas but no more air than the engine die. I cannot figure why the air pressure are going out and not inside the engine.

Thank you.


Rodrigo Ferrari.

[crhemi]

Call Scott at GS!

[GSM]

Hello Rodrigo,


Call me in the morning, I will help you


Scott

[rodrigomorejon]

Hi Scott, I tried to contact you now, I leave message with the attendant, we tested all the installation, GS box work, blowoff work, Paxton blows a lot air, but no positive pressure on manifold, always vacumm no matter the RPM, there is 0.1kg pressure at highs RPM only, we passed the dyno now and the engine still original. We need your help.

Thank you.

Cell number: +55 11 8131-1166

[dntnvme]

Originally Posted by rodrigomorejon

Hi Scott, I tried to contact you now, I leave message with the attendant, we tested all the installation, GS box work, blowoff work, Paxton blows a lot air, but no positive pressure on manifold, always vacumm no matter the RPM, there is 0.1kg pressure at highs RPM only, we passed the dyno now and the engine still original. We need your help.

Thank you.

Cell number: +55 11 8131-1166

I will have scott contact you right away. Sorry for any delays,

Jay

[Jected]

Top stuff guys.

[dntnvme]

Trying to please the customers is a part of top quality customer service. We are here for anyone that buys or wants info on our products. Or if you just have questions were are here for you.

Jay

[Jected]

Most definitely mate and full credit to you as well.

There are a few vendors that are starting too stand out over the rest of late. Well done. Great to see.

[dntnvme]

Originally Posted by Jected

Most definitely mate and full credit to you as well.

There are a few vendors that are starting too stand out over the rest of late. Well done. Great to see.

Thank you sir, I'm glad to see I'm making a difference.