****Brass Balls ****

[Lik2race]

I'd like to find a sufficently sized-1 3/4" to 2" " Brass Ball ",
preferably one that has been "tapped"
to our Thread / Size of 8mm X 1.25.
Anybody have a Link or connection
where I might find this ?
Stan

[cnote05300]

haha.. im gonna leave this one alone. too easy..

[CplDaugherty]

PM Heidi at BT... she might be able to get something close to what you are wanting.

[beomaster5500]

Here's a link...

Liberty Brass 1-800-345-5939

Click the "Brass Balls" link on the right of the page. They note on their web site that if you don't see the balls that you like they stock over 1,000,000 balls in other sizes as well as no quantity too large or small.

Just out of curiosity is this for the gear shifter? If not they do boast sizes up to 6 inches now that would be a nice set of brass balls!



LMAO

[DYNAMITE44]

wow, such a random question.
i don't think you can just buy brass balls at your corner hardware store, but if you are able to find one/some cheap, either drill/tap them yourself or take them to a machine shop.any big place that fixes cars should have a drill press. simply have them put it in the press and drill a hole. then either have them tap it or just buy a single tap from the hardware store (i just bought a 1/4-20 which cost 2.99) and tap it yourself. you could save some money that way, over having someone somewhere drill and tap one custom for you.

[Lik2race]

Originally Posted by Ultimatecarman45

Finally tired of having to say no when people ask you if you have brass balls?

Exactly...Yes,,I do want it for a Shifter Knob, that's why I am wanting
it already "tapped" to OUR 8mm X 1.25 threads.

I posted like I did to see who would or could come up with the koolest
reply.
Stan

[Lik2race]

Originally Posted by beomaster5500

Here's a link...

Liberty Brass 1-800-345-5939
Click the "Brass Balls" link on the right of the page. They note on their web site that if you don't see the balls that you like they stock over 1,000,000 balls in other sizes as well as no quantity too large or small.
Just out of curiosity is this for the gear shifter? If not they do boast sizes up to 6 inches now that would be a nice set of brass balls!



LMAO

I sent email to Liberty Brass..WOW !
Quote>>>>" 2"ball in raw brass would be 75.00 and tapped 1/4-20 blind
standard in stock...you wouild need to modify"
Way too much I think.
Stan

[italianguy63]

I think Dubster may have a pair....

How about an 8-ball? You could just rip one off at a bar!

Brass turns green if you don't rub it enough.....

[300customs]

Originally Posted by cnote05300

haha.. im gonna leave this one alone. too easy..

i was going to tell like2race to go around town and find a statue of a brass bull, but that wouldnt be nice....