Hurst Comp Stick Kit installed on an '08 SRT-8

[The HACK]

Products, both the black bezel and the polished bezel, will be on display at this year's SEMA show in Las Vegas if I'm not mistaken.

[EXSRT4]

I said it once and ill say it again, THEY BETTER make this for the pre 08s......lol. Show some love for the pre 08 now..

[Q8SRT8]

Originally Posted by EXSRT4

I said it once and ill say it again, THEY BETTER make this for the pre 08s......lol. Show some love for the pre 08 now..

What he said

[subzero05]

they are!. Part #'s for the pre -08's have already been assigned
#5380410 is the black on
#5380411 is the polished one

Probably avail for order around SEMA time I'm guessing

[The HACK]

I spoke with the engineer in charge at Hurst (the guy doing the install) and he has confirmed that pre-'08s are in production and *should* be available for order by SEMA

Will keep you informed if plans change.

[immo]

Any pictures of the 05-07 kit?

[immo]

Originally Posted by The HACK

I'll ask the engineer to call me when they're doing the test fitting of the '05-'07 kit and be sure to take picture(s) of the install. If all goes well and they start shipping by SEMA, they'll have the prototype in probably no later than mid October.

Will keep y'all informed.

Thanks!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[The HACK]

Oops. He said the prototypes are in production, not the production models, and that what will be available at SEMA on display will just be the prototype. Actual prodution model that you can order will follow 1-2 month due to the machining queue and the earliest you'll likely be able to order would be closer to January/February time-frame

He's also splitting resources to finish up this car:

2009 Hurst/Hemi® Challenger

I've also seen the prototype Hurst Challenger and it looks imposing.

Originally Posted by The HACK

I spoke with the engineer in charge at Hurst (the guy doing the install) and he has confirmed that pre-'08s are in production and *should* be available for order by SEMA

Will keep you informed if plans change.

[EXSRT4]

Originally Posted by subzero05

they are!. Part #'s for the pre -08's have already been assigned
#5380410 is the black on
#5380411 is the polished one

Probably avail for order around SEMA time I'm guessing

SWEET!!!!